Underground Strut Rack Type 1

Assembly Overview

The underground strut rack is a powerful new prefab family from eVolve. This family is highly configurable and can be utilized in many ways. The rack consists of a configurable base frame, three optional and configurable vertical racks, and two optional interior support posts with bases.

Instance Properties

- Overall Dimensions - Horizontal Base Dimensions

  • Overall Depth
  • Overall Width

- Intermediate Supports -

  • Show Int Support 1- Turns on an internal support post with base
  • Int Support 1 Offset- Enter the distance from the left side of frame to the support
  • Show Int Support 2- Turns on an additional support post with base
  • Int Support 2 Offset- Enter the distance from the right side of the frame to the support

- Post Support # - (1,2,& 3 are identical)

  • Show Post #- Turns on a vertical rack
  • Post # Offset- Distance from the front of the frame to the post support
  • Post # Height- The length of the vertical strut section
  • PS# Rail 7/8"- Use 7/8" strut for cross rail
  • PS# Rail 1-5/8"- Use 1-5/8" strut for cross rail
  • PS# Rail B2B- Use back to back strut (of selected size)
  • PS# Show Rail 1- Shows bottom cross rail
  • PS# Rail 1 Offset- Distance from the top of the base frame to the bottom of the rail
  • PS# Show Rail 2- Shows middle cross rail
  • PS# Rail 2 Offset- Distance from the top of the base frame to the bottom of the rail

Type Properties

  • Strut Width- Changes the size of the frame, vertical, & support post strut.


How did we do?


Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)