Knowledge Base ​>​ ​Families ​ > ​ ​Assemblies

Assemblies

EMT Nipple Assembly

Assembly Overview. Instance Properties. Nipple Length- End to end length of Assembly, not including bushings. Elevation From Level. Type Properties. Set Screw - If checked, set screw connectors will…

Updated 3 years ago by Adam Heon

Junction Box Assembly

Assembly Overview. The eVolve family, eE_ASM_Pullbox_Supported, is a powerful supported junction box family. The family contains an adjustable pull box, several cover options, and a highly configurab…

Updated 3 years ago by Adam Heon

Kitting Boxes

Overview. The eVolve Kitting Box families have been created to significantly reduce the time spent placing common items throughout the project. Rather than modelling each family in each area and kitt…

Updated 2 years ago by Adam Heon

Panel-Tx Frames

Assembly Overview. These panel frame families were created for mounting panels and transformers to a prefabricated frame. Almost all measurements can be adjusted for the perfect configuration. The fa…

Updated 3 years ago by Adam Heon

Strut Stand 1 & 2

Overview. The eVolve Strut Stand Families have been created to provide highly customizable vertical rack options for the rapid placement of panels or any other needed part. All parts of the rack will…

Updated 3 years ago by Adam Heon

Strut Transformer Stand Type 1

Overview. The family, eE_ASM_Strut_TX_Stand_Type_1, is another powerful eVolve prefab family. This rack is designed to have a transformer mounted to the top, but there can be many more uses for it. A…

Updated 3 years ago by Adam Heon

Threaded Rod Assembly

Assembly Overview. Instance Properties. Mounting Length- Length from the top of the strut to the top of the rod. Upper Attachment. Beam Clamp. Beam Clamp Rotate- to rotate the beam clamp, enter the d…

Updated 3 years ago by Adam Heon

1-4 Tier Angled Steel Underground Riser

Introduction. The eVolve team has created a new angled steel riser/skid family to provide even more options when modeling underground conduit. The family is fully parametric and can be made to contai…

Updated 2 years ago by Adam Heon

Underground Strut Rack Type 1

Assembly Overview. The underground strut rack is a powerful new prefab family from eVolve. This family is highly configurable and can be utilized in many ways. The rack consists of a configurable bas…

Updated 3 years ago by Adam Heon

Powered by HelpDocs (opens in a new tab)