Knowledge Base ​>​ ​Families ​ > ​ ​Cable Tray

Cable Tray

RediRail Cable Tray System Overview & Modeling

System Overview. Due to popular requests, eVolve contains a group of cable tray families based on the B-Line Redi Rail Cable Tray System. The system includes straight ladder sections, crosses, tees,…

Updated 3 years ago by Adam Heon

RediRail Vertical Bend

Overview. Bend Angle Angle 90°- Check this box to set the angle to 90°. Angle 60°- Check this box to set the angle to 60°. Angle 45°- Check this box to set the angle to 45°. Angle 30°- Check this box…

Updated 3 years ago by Adam Heon

RediRail Cross

Family Overview. Side 2 Width Set Reducing Width- If checked, will change the front to back rail width to the option selected below, otherwise, all ends are equal width. Width Options.. Bend Radius-…

Updated 3 years ago by Adam Heon

RediRail Tee

Overview. Side 2 Width Set Reducing width- Select this option to reduce or expand the center/front section of the cable tray. Side 2 Width Options- Select a width for side 2 from the available option…

Updated 3 years ago by Adam Heon

RediRail Straight Ladder

Family Overview. Length Options Tray Length- Length of modeled piece. Length 10' Segments- Default segment length option. Length 12' Segments- Default segment length option.. Tray Width- Select a wid…

Updated 3 years ago by Adam Heon

RediRail Horizontal Bend

Overview. Bend Angle Angle 90°- Check this box to set the angle to 90°. Angle 60°- Check this box to set the angle to 60°. Angle 45°- Check this box to set the angle to 45°. Angle 30°- Check this box…

Updated 3 years ago by Adam Heon

Powered by HelpDocs (opens in a new tab)